>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D PRINT MODEL DESCRIPTION
Exploding Volcano Humidifier | 3D Printer Model Files
What you will need:
5mm Pre Wired LED, Red DC3-5V - Amazon / Aliexpress
22awg Silicone Electrical Wire - Amazon / Aliexpress
Soldering Iron Kit - Amazon / Aliexpress
USB Mini Humidifier - Amazon / Aliexpress
5V 2A Micro USB Power Supply - Amazon / Aliexpress
● This STL file is recommended for FDM Printers!
Approximately Height: 18.5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
● Line Width/ Nozzle: 0.4 mm
● First Layer Line Width: 0.48 mm / 120%
● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s
(All the other layers on Bambu Lab)
● Recommended Initial Layer Height: 0.16 mm
● Recommended Layer Height: 0.16 mm
● Recommended Perimeters/ Walls: 3.
● Recommended Infill (%): 10% (Gyroid)
● Needs Support: No.
● Build Plate Adhesion: Skirt.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - FOR THE WATER TANK
Line Width/ Nozzle: 0.4 mm
Outer Wall: 0.70 mm
Recommended Layer Height: 0.16 mm
Wall Loops: 3
Top Shell Layers: 0
Bottom Surface Pattern: Monotonic Line
Bottom Shell Layers: 5
Speed For Outer Wall: 30 mm/s
Wall Overlap: 50%
Infill: 0%
Click with the right button to “Height Range Modifier” and set it 5 Walls from 0 to 1mm height.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D PRINT MODEL DESCRIPTION
Exploding Volcano Humidifier | 3D Printer Model Files
What you will need:
5mm Pre Wired LED, Red DC3-5V - Amazon / Aliexpress
22awg Silicone Electrical Wire - Amazon / Aliexpress
Soldering Iron Kit - Amazon / Aliexpress
USB Mini Humidifier - Amazon / Aliexpress
5V 2A Micro USB Power Supply - Amazon / Aliexpress
● This STL file is recommended for FDM Printers!
Approximately Height: 18.5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
● Line Width/ Nozzle: 0.4 mm
● First Layer Line Width: 0.48 mm / 120%
● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s
(All the other layers on Bambu Lab)
● Recommended Initial Layer Height: 0.16 mm
● Recommended Layer Height: 0.16 mm
● Recommended Perimeters/ Walls: 3.
● Recommended Infill (%): 10% (Gyroid)
● Needs Support: No.
● Build Plate Adhesion: Skirt.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - FOR THE WATER TANK
Line Width/ Nozzle: 0.4 mm
Outer Wall: 0.70 mm
Recommended Layer Height: 0.16 mm
Wall Loops: 3
Top Shell Layers: 0
Bottom Surface Pattern: Monotonic Line
Bottom Shell Layers: 5
Speed For Outer Wall: 30 mm/s
Wall Overlap: 50%
Infill: 0%
Click with the right button to “Height Range Modifier” and set it 5 Walls from 0 to 1mm height.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
