Your Cart ()
cload

GUARANTEED SAFE & SECURE CHECKOUT

Skull Rock Band Singer Figure | 3D Printer Model Files

Your Price:
$18.73 $50.00
You Save: $31.27 63%
Add to wishlist
Checkout Secure
Only 3 left! .. people are viewing this, and 3 recently purchased it
3 People have recently bought this

Hurry, Offer Ends in:

0
Days
0
Hours
0
Minutes
0
Seconds

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<

File Type: STL and 3MF

3D MODEL DESCRIPTION


Our vocal really struck a chord here, don’t you think?


Assembling Instructions:


 

  • Take GEAR_1 and tighten the spring with your fingers as shown in the video, and place it inside BODY, fitting the outer hole of the spring onto the pin inside BODY.
  • Fit GEAR_3 onto GEAR_2 and attach it on top of GEAR_1 so that GEAR_3 is facing downwards.
  • From the outside, thread GEAR_8 so that the pin goes through the holes of the aligned gears on the inside.
  • Attach GEAR_4 onto the pin of BODY.
  • Attach GEAR_5 onto the top of GEAR_3, through the pin of GEAR_8.
  • Place GEAR_6 on top of GEAR_4.
  • Fit CHEST_PLATE on top of everything, aligning the pins with the holes and the slots on the side, as shown in the video.
  • Put GEAR_7 over CHEST_PLATE, fitting it onto the first pin.
  • Attach CHEST_ELIPSE so that the inner diameter touches GEAR_7, as shown in the video.
  • Fit CHEST_ELIPSE_SLIDER below CHEST_ELIPSE, in its designated space.
  • Finish by attaching and gluing the remaining parts

 

  • This STL file is recommended for FDM Printers!
  • Approximately Height: 24cm


3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)


  • Line Width/ Nozzle: 0.4 mm
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
  • Recommended Initial Layer Height:  0.12 mm
  • Recommended Layer Height:  0.12 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: No.
  • Build Plate Adhesion: None.

 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Shipping This item ships to

Description

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<

File Type: STL and 3MF

3D MODEL DESCRIPTION


Our vocal really struck a chord here, don’t you think?


Assembling Instructions:


 

  • Take GEAR_1 and tighten the spring with your fingers as shown in the video, and place it inside BODY, fitting the outer hole of the spring onto the pin inside BODY.
  • Fit GEAR_3 onto GEAR_2 and attach it on top of GEAR_1 so that GEAR_3 is facing downwards.
  • From the outside, thread GEAR_8 so that the pin goes through the holes of the aligned gears on the inside.
  • Attach GEAR_4 onto the pin of BODY.
  • Attach GEAR_5 onto the top of GEAR_3, through the pin of GEAR_8.
  • Place GEAR_6 on top of GEAR_4.
  • Fit CHEST_PLATE on top of everything, aligning the pins with the holes and the slots on the side, as shown in the video.
  • Put GEAR_7 over CHEST_PLATE, fitting it onto the first pin.
  • Attach CHEST_ELIPSE so that the inner diameter touches GEAR_7, as shown in the video.
  • Fit CHEST_ELIPSE_SLIDER below CHEST_ELIPSE, in its designated space.
  • Finish by attaching and gluing the remaining parts

 

  • This STL file is recommended for FDM Printers!
  • Approximately Height: 24cm


3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)


  • Line Width/ Nozzle: 0.4 mm
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
  • Recommended Initial Layer Height:  0.12 mm
  • Recommended Layer Height:  0.12 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: No.
  • Build Plate Adhesion: None.

 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Shipping

Shipping This item ships to
Skull Rock Band Singer Figure | 3D Printer Model Files

Skull Rock Band Singer Figure | 3D Printer Model Files

$18.73 $50.00
Add to wishlist
Skull Rock Band Singer Figure | 3D Printer Model Files

Skull Rock Band Singer Figure | 3D Printer Model Files

Your Price:
$18.73 $50.00
You Save: $31.27 63%
Truth Social
3 visitors right now
3 visitors have this item in their cart right now
3 people have bought this item
3 % of people buy 2 or more

Recently viewed products

Liquid error (layout/theme line 341): Could not find asset snippets/th-product-review.liquid