>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
This coat guardian is always in a good mood.
- This STL file is recommended for FDM Printers!
-
Approximately Height : 19,5 cm
1) Fit both Left Bigger Gear and Right Bigger Gear into the Box with the doors closed;
2) Put the Hook inside the Box up to the marking;
3) Place Screw 1 and Screw 2 inside Smaller Gear 1 and Smaller Gear 2 respectively, then place both inside the Box.
4) After placing both Smaller Gears inside the Box, secure them in with your hands while you attach Washer 1 and Washer 2 from the outside on the back of the model;
5) Glue the Mariachi’s slot into the hook and the other one on the box.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
This coat guardian is always in a good mood.
- This STL file is recommended for FDM Printers!
-
Approximately Height : 19,5 cm
1) Fit both Left Bigger Gear and Right Bigger Gear into the Box with the doors closed;
2) Put the Hook inside the Box up to the marking;
3) Place Screw 1 and Screw 2 inside Smaller Gear 1 and Smaller Gear 2 respectively, then place both inside the Box.
4) After placing both Smaller Gears inside the Box, secure them in with your hands while you attach Washer 1 and Washer 2 from the outside on the back of the model;
5) Glue the Mariachi’s slot into the hook and the other one on the box.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
