>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
Watch out, it’s armed! The Marlin is ready to duel you for an honorable place at your house. En garde!
All our fish articulated fish are print-in-place, and designed especially for better and easier assembly. For a mesmerizing movement effect, remember to only glue both sides on the pin connection.
- This STL file is recommended for FDM Printers!
- Approximately length: Fish 21.5cm x 7cm x 4cm
Stand 17cm x 10cm x 1.1cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL and 3MF
3D MODEL DESCRIPTION
Watch out, it’s armed! The Marlin is ready to duel you for an honorable place at your house. En garde!
All our fish articulated fish are print-in-place, and designed especially for better and easier assembly. For a mesmerizing movement effect, remember to only glue both sides on the pin connection.
- This STL file is recommended for FDM Printers!
- Approximately length: Fish 21.5cm x 7cm x 4cm
Stand 17cm x 10cm x 1.1cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
