>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D PRINT MODEL DESCRIPTION
Baby Dragon Humidifier
What you will need:
5mm Pre Wired LED, Red DC3-5V - Amazon / Aliexpress
22awg Silicone Electrical Wire - Amazon / Aliexpress
Soldering Iron Kit - Amazon / Aliexpress
USB Mini Humidifier - Amazon / Aliexpress
5V 2A Micro USB Power Supply - Amazon / Aliexpress
● This STL file is recommended for FDM Printers!
● Approximately Height: 17 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
● Line Width/ Nozzle: 0.4 mm
● First Layer Line Width: 0.48 mm / 120%
● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s
(All the other layers on Bambu Lab)
● Recommended Initial Layer Height: 0.16 mm
● Recommended Layer Height: 0.16 mm
● Recommended Perimeters/ Walls: 3.
● Recommended Infill (%): 10% (Gyroid)
● Needs Support: No.
● Build Plate Adhesion: Skirt.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - FOR THE WATER TANK
● Line Width/ Nozzle: 0.4 mm
● Outer Wall: 0.70 mm
● Recommended Layer Height: 0.16 mm
● Wall Loops: 3
● Top Shell Layers: 0
● Bottom Surface Pattern: Monotonic Line
● Bottom Shell Layers: 5
● Speed For Outer Wall: 30 mm/s
● Wall Overlap: 50%
● Infill: 0%
● Click with the right button to “Height Range Modifier” and set it 5 Walls from 0 to 1 mm height.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Shipping | This item ships to |
Description
>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. <<
File Type: STL
3D PRINT MODEL DESCRIPTION
Baby Dragon Humidifier
What you will need:
5mm Pre Wired LED, Red DC3-5V - Amazon / Aliexpress
22awg Silicone Electrical Wire - Amazon / Aliexpress
Soldering Iron Kit - Amazon / Aliexpress
USB Mini Humidifier - Amazon / Aliexpress
5V 2A Micro USB Power Supply - Amazon / Aliexpress
● This STL file is recommended for FDM Printers!
● Approximately Height: 17 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
● Line Width/ Nozzle: 0.4 mm
● First Layer Line Width: 0.48 mm / 120%
● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s
(All the other layers on Bambu Lab)
● Recommended Initial Layer Height: 0.16 mm
● Recommended Layer Height: 0.16 mm
● Recommended Perimeters/ Walls: 3.
● Recommended Infill (%): 10% (Gyroid)
● Needs Support: No.
● Build Plate Adhesion: Skirt.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - FOR THE WATER TANK
● Line Width/ Nozzle: 0.4 mm
● Outer Wall: 0.70 mm
● Recommended Layer Height: 0.16 mm
● Wall Loops: 3
● Top Shell Layers: 0
● Bottom Surface Pattern: Monotonic Line
● Bottom Shell Layers: 5
● Speed For Outer Wall: 30 mm/s
● Wall Overlap: 50%
● Infill: 0%
● Click with the right button to “Height Range Modifier” and set it 5 Walls from 0 to 1 mm height.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Shipping
| Shipping | This item ships to |
Related Products
